TCD 系列除濕干燥送料組合及除濕、干燥、二段送料三種功能于一體，廣泛適用于各種塑料原料，尤其是吸濕性較強的工程塑料，如 PA、PC、PBT、PET 等，TCD-H 型在理想狀態也最低可達 -40℃的露點，該系列品采用 TD-H 系列蜂巢轉輪除濕機搭配下吹式全不銹鋼歐化保溫干燥料桶組合而成。全系列采用 P.l.D 溫控系統為標準配置，另提供 PLC 控制搭配 LCD 觸控式人機界面供選配，提供露點計以及自動填料機供選配。
TCD series dehumidification drying combined feeding and dehumidification, drying, 2 feed three functions in one, is widely used in all kinds of plastic raw materials, especially the hygroscopicity strong engineering plastics, such as PA, PC, PBT, PET, TCD - H in the ideal state is the lowest of dew point to 40 ℃, This series of products is made of TD-H series honeycomb transmission dehumidifier com?bined with down-blown all stainless steel European thermal insulation drying drum. The whole series adopts the P.l.D temperature control system as the standard accessories, and also provides PLC control with LCD touch man-machine interface for optional selec?tion, dew point meter and automatic filler for optional selection.
TCD 除濕干燥組合一律配備蜂巢轉輪，可得到穩定性好的低露點干燥空氣，造型分為半開放式與全密閉兩種；
適用于吸濕性強的工程塑料原料如 : PA、PC、PBT、PET 等 ;
集除濕、干燥、二段送料三種功能于一體，并可選擇三段送料功能 ;
保溫式干燥料桶采用下吹風管設計，搭配旋風排氣裝置，防止熱能散失，確保溫度，提高干燥效率 ;
所有機器均搭配回路密閉的送料系統，可避免干燥后的原料因接觸外界空氣而再度受潮；
該系列除濕系統采用雙冷卻器結構，確保更低回風溫度及露點 ;
送料系統配備截料閥，確保料管中無殘余原料 ;
該機配備微電腦控制為標準裝備，可選配 PLC 控制及 LCD 觸控式人機界面，操作集中方便，可控制整機自動運行 ;
可選配露點計，隨時監控露貼 ;
TCD dehumidification and drying combination is equipped with honeycomb wheel, can get good stability low dew point dry air, modeling is divided into semi-open and
fully closed two;
Suitable for engineering plastic raw materials with strong moisture absorption, such as PA, PC, PBT, PET, etc.
Set dehumidification, drying, two stage feeding three functions in one, and can choose three stage feeding function;
The thermal insulation drying barrel adopts the design of downblowing air pipe, with the cyclone exhaust device, to prevent the loss of heat energy, ensure the tempera?ture, improve the drying efficiency;
All machines are equipped with closed loop feeding system, can avoid dry raw materials due to contact with the outside air and damp again;
Dehumidification system adopts double cooler structure to ensure lower return air temperature and dew point;
Feeding system accessories hopper, to ensure that there is no residual raw material in the material pipe;
The machine accessories microcomputer control for the standard assembly, optional PLC control and LCD touch man-machine interface, centralized and convenient opera?tion, can control the automatic passage of the whole machine;
Optional dew point meter to monitor dew paste at any time;
 
| 
| 
